Ideas, details & craftsmanship

How to choose metal bench legs: height, spacing and seat board

How to choose metal bench legs: height, spacing and seat board

Choose bench legs from the finished seat height, the real seat board and the support spacing. Do not copy a leg size from a photograph. First decide where the finished sitting surface must be, then subtract the actual board thickness and any non-compressible layer.

Start with the finished seat height

If H is the finished height, L the leg height and T the rigid seat-board thickness, use H = L + T. If the bench has a cushion, test its compressed sitting height separately rather than treating the advertised cushion thickness as rigid material. The best reference is an existing chair or bench that the intended users already find comfortable.

Diagram of finished bench height H, leg height L and board thickness T
Bench height: H = leg height L + rigid board thickness T.

Check the seat board before choosing supports

Record the board length, width, thickness, material, construction and approximate weight. Mark joints, cracks, live edges and hardware on the underside. A long or thin board may need different support than a short, stiff one; product photos cannot approve a particular board. Follow the board supplier’s fastening guidance.

Plan spacing and end overhang

Place the real legs or full-size templates under the board before drilling. Check that every mounting hole lies in sound material. Keep enough end overhang for a balanced appearance, but do not push the supports so far inward that the board flexes. There is no universal overhang: it depends on the board and the selected leg.

Test the bench with the table

Move the bench to the table and test the complete arrangement. The user needs space for feet, knees and the movement of sitting down. Check whether the bench can slide under the table as intended and whether table legs or crossbars block the bench. Also test the outside seats, where support placement often causes interference.

TopFero Atria metal bench leg
Official Atria bench-leg product image; verify the selected variant.

Verify the exact product variant

TopFero’s active Atria bench leg is one verified example with current variants and an official product image. Compare the chosen variant’s dimensions with your board and layout before ordering; do not infer dimensions from the image. If uncertain, send the board measurements, underside photo and intended finished height for review.

View Atria bench legs · Browse all metal bench legs · Read the support-positioning guide

← All guides