Ideas, details & craftsmanship

Desk height: calculate the right table-leg length

Desk height: calculate the right table-leg length

Choose desk height from the person, chair and task—not from a photograph. Set the chair so feet are supported and the sitting position is stable, then mock up the work surface. The useful desk height is where forearms can rest without lifting the shoulders or forcing the wrists upward. For shared desks, one fixed height may be a compromise.

Set the chair before the desk

Measure from the finished floor to the top of the temporary surface. If H is the desired finished height, L the leg height and T the actual top thickness, use L = H − T. Subtract any rigid spacer that adds height as well. Measure the real top at several points and keep the calculation in millimetres until the final choice.

Desk height formula with leg height L and top thickness T
Finished height H = leg height L + top thickness T.

Calculate the required leg height

A 72 cm leg with a 3 cm top gives approximately 75 cm finished height before any separate spacer: 72 + 3 = 75. This is an arithmetic example, not an ergonomic promise. TopFero’s active Leg product currently has an available 72 cm variant, so compare that exact result with your seated test rather than assuming it fits everyone.

Worked example with a 72 cm leg

Place the keyboard, mouse and monitor as they will be used. Check that thighs, knees, chair arms and cable trays clear the underside. The mounting plate and any frame member can reduce usable space even when the top surface is correct. Also confirm that the top is suitable for four independent supports and the chosen fixing method.

Check clearance and equipment

Before ordering, record finished height, top thickness, chair seat range, user height, underside obstacles and floor level. Make a full-size mock-up with a board or sturdy temporary surface, work at it for several minutes, then repeat the measurement. A calculator cannot replace this physical check.

TopFero Leg black steel table leg
Official product image of the active Leg table leg; verify the 72 cm variant.

Verify the selected product

The active Leg table leg is a concrete example with current 72 cm availability and an official product image. Verify the selected variant and the real mounting zone before purchase. If the workspace also needs a connected frame, cable clearance or additional stiffness, compare the desk-base guide rather than choosing separate legs from height alone.

View the Leg table leg · Browse metal table legs · Read the desk-base and clearance guide

← All guides